Because of their many advantages, lifting stations are now a must for anyone looking for a low cost, safe and environmentally friendly solution.
Polyethylene blueBOX lifting stations are an effective solution for collecting and pumping wastewater or drainage water to the sewer system when the latter is too far away or when gravity feed is not available.
They are used in systems located below the level of the sewer system or when, following building redevelopment, the intended use of rooms requiring a hydraulic connection is to be changed.
blueBOX lifting stations can be installed on the floor or underground, in a FIXED configuration or with a Coupling Device (DAC). The design is optimised for use with Zenit bluePRO series pumps with vortex impeller (DG) or with grinding system (GR).
Certificate
Thanks to careful design and testing, blueBOX has passed all the tests required by the European procedure for lifting stations and is certified according to 12050-1/2 standard, which sets out the requirements for pumping systems, in order to define the correct draining of wastewater with and without faecal material.
Automatic start/stop device
The motor is started and stopped by the float inside the pump or by an optional device that detects the liquid level in the tank.
Level sensor 4-20 mA
For constant detection of the liquid level and setting of the start/stop thresholds for the main and the secondary pump (if installed).
It uses a standard 4-20 mA sensor housed inside the tank that can be removed by unscrewing a tightly sealed ring nut.
Thanks to its wide reading range, it can use all the available volume while optimising operation.